Preskoči na glavno vsebino

Kako samodejno oštevilčiti stolpec na podlagi vrednosti celice v drugem stolpcu v Excelu?

številka-dokumenta-stolpec-na-vrednosti-1
Na primer, v Excelu imate nabor podatkov in želite stolpec A oštevilčiti na podlagi vrednosti v stolpcu B, kot je prikazano spodaj. Zdaj vam bo ta vadnica povedala formulo za rešitev te naloge v Excelu.
Samodejno oštevilči stolpec na podlagi vrednosti v drugem stolpcu

puščica modri desni mehurček Samodejno oštevilči stolpec na podlagi vrednosti v drugem stolpcu

Na srečo obstaja formula, ki lahko hitro oštevilči stolpec na podlagi vrednosti stolpca prašnika v Excelu.

1. Vnesite 1 v prvo celico stolpca, ki ga želite oštevilčiti. Oglejte si posnetek zaslona:

številka-dokumenta-stolpec-na-vrednosti-2

2. V drugo celico stolpca, ki ga želite oštevilčiti, vnesite to formulo =IF(B1:B13="Total","",COUNTIF($A$1:A1,">0")+1)in pritisnite tipko Enter.

številka-dokumenta-stolpec-na-vrednosti-3

Nasvet: V zgornji formuli je B1: B13 obseg stolpcev, na podlagi katerega želite oštevilčiti, A1 pa celico, v katero ste vnesli 1, in »Skupaj« je vrednost, ki je ne želite šteti.

3. Nato povlecite ročico za samodejno izpolnjevanje v obseg stolpcev, ki ga želite oštevilčiti. Oglejte si posnetek zaslona:

številka-dokumenta-stolpec-na-vrednosti-4

Relativni članki:

Najboljša pisarniška orodja za produktivnost

🤖 Kutools AI Aide: Revolucionirajte analizo podatkov na podlagi: Inteligentna izvedba   |  Ustvari kodo  |  Ustvarite formule po meri  |  Analizirajte podatke in ustvarite grafikone  |  Prikličite funkcije Kutools...
Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup  |   Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule   |  Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic   |  Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij:  12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

Opis

Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (11)
No ratings yet. Be the first to rate!
Anil Kumar D S
Anil Kumar D S
This comment was minimized by the moderator on the site
Hi Sir,

When Cell 1 is Number this FT20240001 and Next need to auto calculate FT20240002 ( FT20240001 +1) in If function.

Thanks
Reply
0
0
sv
sv
This comment was minimized by the moderator on the site
How do i take set values and add different varying values to it for projection.
Reply
0
0
Mark Zago
Mark Zago
This comment was minimized by the moderator on the site
Sales data and applying a sequential job number that grows by 1 for each entry?As sales data is entered into a table, at the time of the client acceptance a date stamp is applied to the relevant cell in that rowAcceptance is random and the row (client) to be next accepted is also random.
I have a Column of cells (Column A) partially populated by a numerical date range that increases as per the date
Without sorting the table.
How do I write a formula that will calculate a sequential whole number starting at 1 in the corresponding cellegcell A32020 Nov 15th 13:17:50 (time stamp)(equates to) 44150.5540549768
A10 next entry 2020 Nov 15th 11:48:16 (time stamp)44150.4918552083
A13 next entry
2020 Nov 15th 11:48:26 (time stamp)
44150.4919619213
etc
In the corresponding cellsC3 needs to return a value of 3C10 needs to return a value of 1C13 a value of 2etcgrowing by 1 each time
Any ideas?
Reply
0
0
Neeraj Nagpal
Neeraj Nagpal
This comment was minimized by the moderator on the site
This formula works but my first number based on the criteria is starting with 2 and then 3,4,5 onwards. How can I get it to start at 1?
Reply
0
0
Sunny
Sunny     Neeraj Nagpal
This comment was minimized by the moderator on the site
Hi, you can change the last argument 1 in the formula to 2, like =IF(B1:B13="Total","",COUNTIF($A$1:A1,">0")+2).
Reply
Report
0
0
Damphir
Damphir
This comment was minimized by the moderator on the site
Yo necesito hacer lo mismo que este ejemplo, pero en mi caso es requerido que me de un consecutivo segun un numero X en una columna, pero que si me varia el numero X en esa columna, me de un consecutivo diferente ej...

A B
1 1
2 1
3 1
1 2
2 2

Algo asi....
Reply
0
0
AG
AG     Damphir
This comment was minimized by the moderator on the site
In cell A3 paste the following

=IF(B3=B2,"",COUNTIF($A$2:A2,">0")+1)
Reply
0
0
sb
sb
This comment was minimized by the moderator on the site
How do i autonumber based on a value but in my case there is no "TOTAL". This is how my data is: UNKNOWN UNKNOWN UNKNOWN SEG034-PI-012.038 SEG034-PI-012.039 SEG034-PI-012.038 SEG034-PI-012.038 SEG034-PI-012.038 SEG034-PI-001.019 SEG034-PI-001.019 UNKNOWN UNKNOWN SEG034-PI-001.019 SEG034-PI-001.019 SEG034-PI-001.019 SEG034-PI-001.021 SEG034-PI-001.021 SEG034-PI-001.021 UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN CT0034.0202.004 CT0034.0202.004 So i basically want to put number (ID), if the value repeats itll get the same value if it already has assigned (in the example data unknown repeats randomly). Please help.
Reply
0
0
Sean
Sean     sb
This comment was minimized by the moderator on the site
Hi there,
Hope this works. =IF(A3="";"";IF(IFERROR(VLOOKUP(A3;$A$2:B2;2;FALSE);"N/A")="N/A";MAX($B$2:B2+1);VLOOKUP(A3;$A$2:B2;2;FALSE)))
REMEMBER TO MAKE YOUR FIRST CELL ex. "B1", 1 THEN BELOW IT ADD THE FORMULA ex. "B2".


Reply
0
0
Brandon
Brandon     sb
This comment was minimized by the moderator on the site
Did you ever get an answer to this? I have the same question.
Reply
0
0
sanjay
sanjay     Brandon
This comment was minimized by the moderator on the site
Hi, I have similar question. I have a alphanumeric values of Column A, some times repeating some time unique.. So Base on the numerical values available in the Column A, I want the a serial number auto assigned in Column B as shown below.Can any help please?

COLUMN# A COLUMN# BWO/20-21/001 001-01WO/20-21/001 001-02
WO/20-21/001 001-03
WO/20-21/002 002-01
WO/20-21/002 002-02
WO/20-21/002 002-03
WO/20-21/002 002-04
WO/20-21/003 003-01


Reply
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations