Preskoči na glavno vsebino

Kako zasenčiti celico na podlagi druge vrednosti celice v Excelu?

Recimo, da želite celico (npr. A1) zasenčiti z določeno barvo ozadja, če celica B4 izpolnjuje merila, na primer ima določeno vrednost ali je vrednost večja ali manjša od določenega števila. Kaj bi naredil Ta članek vam bo prikazal metodo.

S pogojnim oblikovanjem celico zasenčite na podlagi druge vrednosti celice


S pogojnim oblikovanjem celico zasenčite na podlagi druge vrednosti celice

Za zasenčenje celice na podlagi druge vrednosti celice v Excelu lahko storite naslednje.

1. Na podlagi vrednosti druge celice izberite celico (pravi A1), ki jo želite zasenčiti, in kliknite Pogojno oblikovanje > Novo pravilo pod HOME tab.

2. V Ljubljani Novo pravilo oblikovanja pogovorno okno, morate:

  • 2.1 Izberite S formulo določite, katere celice želite formatirati možnost v Izberite vrsto pravila škatla;
  • 2.2 Če želite zasenčiti celico A1, ko je vrednost B4 večja od 500, vnesite formulo = B4> 500 v Oblikujte vrednosti, kjer je ta formula resnična škatla;
    nasveti: če želite zasenčiti celico A1, ko ima B4 določeno vrednost, na primer "test", uporabite to formulo = $ B4 = "test". Spremenljivko v formuli lahko spremenite glede na vaše potrebe.
  • 2.3 Kliknite na oblikovana gumb za določitev barve ozadja;
  • 2.4 Kliknite na OK , ko se vrne v Novo pravilo oblikovanja pogovorno okno. Oglejte si posnetek zaslona:

Nato lahko vidite, da je navedena celica zasenčena glede na vrednost druge celice, kot je prikazano spodaj.


Sorodni članki:

Najboljša pisarniška orodja za produktivnost

Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup    Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule    Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic    Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

zavihek kte 201905


Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (17)
Rated 4 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
I just wanted to leave my experience after reading the comments left here when in need of accomplishing entire columns needing to correlate to their respective rows under another column.
I hope I can help out the community for anyone else in search for answers with the same needs as I had.

This example is if you need each cell to act independently according to a cell in its own respective row. For example: Looking at row 4 I need my cell in column H to change color based on a value in column F (still in row 4). Lets say in this case I need H4 to change when the word Complete is entered in F4. (But I need this rule to apply for all rows. -Lets say I have 104 rows total.)

Conditional Formatting: New Rule > "Use a formula to determine which cells to format" - Format values where this formula is true: (enter the following) =$F1:$F104="Complete" (-Choose Format desired)
(We now need to add the cells this new rule applies to, enter the following) =$H$1:$H$104 > Apply > OK

You should now have independent rows formatting cells in column H dependent on the value "Complete" being entered in cells in column F.
Rated 4 out of 5
This comment was minimized by the moderator on the site
I have two column Buy Units (A) and Sell unites (B). When typing sell units B column, If B1>A1 return red font in B1 value. (To say that there is typo= you can not sale more unit than you have got) FOR EACH TRANSACTIONS. Meaning same to be applied for B2>A2, B3>A3., B4>A4... I do not want to keep typing Conditional Formating for each single cell, just want to COPY and Paste. This seems relatively easy ask but taking me a toll! Can you please help?
This comment was minimized by the moderator on the site
Yes I want learn/ know this
This comment was minimized by the moderator on the site
How do I solve this ?
Say I have 5 Columns - CORRECT_ANS, PERSON1, PERSON2, PERSON3, PERSON4
and say 4 rows with values as below.

CORRECT_ANS, PERSON1, PERSON2, PERSON3, PERSON4
A B C A A
B A B D B
C C C A B
C A D C C

Values in Columns PERSON1 to PERSON4 should match against corrresponding row in CORRECT_ANS. If value is same, then Cell color to be GREEN, else RED.
So in 1st case, PERSON3 and PERSON4 cell should be GREEN, rest RED. Similarly 2nd row, PERSON2 and PERSON4 gets GREEN, rest RED, and so on.
This comment was minimized by the moderator on the site
what if I want a cell to be shaded based on the presence or absence of text in a different cell?
This comment was minimized by the moderator on the site
If you want the condition to format several cells on the same row, select them all and use the formula =$J1="your_text_here"
This comment was minimized by the moderator on the site
HI what if I want to condition a cell based on the presence or not of text in a different cell?
This comment was minimized by the moderator on the site
To apply this to multiple rows, use the same formula (Excel automatically continues the formula with relative values).
e.g. for the following sheet,
_|_A_B
1| 0 0
2| 0 1
3| 1 0
4| 1 1
to make A1 depend on B1, and A2 depend on B2, and so forth, use =$B1=0. To make all the cells in A depend on one cell in B, use =$B$1=0, and to make the cells in A depend on the cells in the next row of B, use =$B2=0 (with the A cells selected from A1).
This comment was minimized by the moderator on the site
Ho do I apply this rule by row
For example, I want Cell I2 to be formatted by G2. I3 by G3 and so on
This comment was minimized by the moderator on the site
Hey for doing it by row, let's say I want to make A red when B > 0.

For that I would go to A, and enter the formula =B:B > 0

That's how you would do this
This comment was minimized by the moderator on the site
Hi,
I want to dpo the following. Help me out.
A1 to be green if B1>0
A2 to be green if B1>0
.
.
.
.
A250 to be green if B250>0

I am unable to copy the formula to all the rows.
This comment was minimized by the moderator on the site
How can we apply the rule on multiple cells with a single formula? Applying the rule on every single cell will be a hectic job.
This comment was minimized by the moderator on the site
How might i format column N to be shaded according to value in column L? (Eg higher red, lower blue, equals green, no value - no shading)
Can i write a formula for column N in conditional formatting?

K L M N
DD 0.2 0.8

AM 0.8 1.0

TB 1.0 1.0

AM 1.0 1.0

TB 0.6 0.8

AM 0.4 0.4

AM 0.8 0.8


Any help appreciated
D
This comment was minimized by the moderator on the site
Hi Deb,
Sorry can't help you with that. Thank you for your comment.
This comment was minimized by the moderator on the site
Hey Deb and Crystal,

For doing it by row, let's say I want to make A red when B > 0.

For that I would go to A, and enter the formula =B:B > 0

That's how you would do this
This comment was minimized by the moderator on the site
i want to know formula for color change of cell on basis of two different cell values
This comment was minimized by the moderator on the site
Hi Manish,
Please try this formula =AND($A2="KTE", $B2>100)
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations