Preskoči na glavno vsebino

Kako preveriti, ali je v Excelu čas med dvakrat?

Kako lahko v Excelu preverite, ali je določen čas med dvema datumoma? Če jih bomo pregledali enega za drugim, bomo zapravili veliko časa, tukaj bom predstavil nekaj preprostih formul za rešitev tega posla.

S formulami preverite, ali je določen čas med dvema datumoma


puščica modri desni mehurček S formulami preverite, ali je določen čas med dvema datumoma

Na primer, imam dva stolpca krat, ki sta začetni in končni čas v stolpcu A in stolpcu B ločeno, zdaj želim preveriti, ali je čas v stolpcu C med časovnim obsegom v stolpcu A in stolpcu B, kot je prikazano spodaj na sliki zaslona. :

doc preveri, če je čas med časi 1

Naslednje formule vam lahko pomagajo ugotoviti, ali je določen čas med dvakrat, naredite naslednje:

V prazno celico poleg svojih podatkov vnesite katero koli od naslednjih formul, kjer želite izpisati rezultat:

= IF (C2 = MEDIAN (A2, B2, C2), "Da", "Ne")

=IF(AND(C2>=MIN(A2:B2),C2<=MAX(A2:B2)),"YES","NO")

In nato povlecite ročico za polnjenje navzdol do celic, za katere želite uporabiti to formulo, in čas, če je bil določen dvakrat določen, če je med dvakrat, se prikaže Da, če ni med obema krat bo prikazano Ne, glej posnetek zaslona:

doc preveri, če je čas med časi 2

Opomba: V zgornjih formulah C2 je določen čas, ki ga želite preveriti, in A2 in B2 so celice vsebujejo dvakrat, na podlagi katerih želite preveriti.

Najboljša pisarniška orodja za produktivnost

🤖 Kutools AI Aide: Revolucionirajte analizo podatkov na podlagi: Inteligentna izvedba   |  Ustvari kodo  |  Ustvarite formule po meri  |  Analizirajte podatke in ustvarite grafikone  |  Prikličite funkcije Kutools...
Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup    Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule    Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic    Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

Opis


Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (22)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Curious how to write a formula that results a number (1) to count a person present at a specific time.
For example: If I need to know that a person was present at 2:45pm, during these 5 schedules.
IN OUT 2:45pm
11:00 5:00PM 1
12:00 4:13PM 1
9:00 5:00PM 1
7:47 2:10PM 0
3:50 6:00PM 0

Need to result a 1 - if they arrive before 2:44pm
And result a 1 - if they depart after 2:46pm

Suggestions?
This comment was minimized by the moderator on the site
Hello,

This is a great article and the OR(MOD... is a great work around for times on different dates.

How would I incorporate this to a formula with the following parameters:

If Cell A1 reads as yesterday between 22:00 and 23:59, display as same day.
If Cell A1 reads as today between 00:00 and 21:59, display as yesterday.

Any assistance here is GREATLY appreciated as I'm a lost little puppy on this one.
Rated 5 out of 5
This comment was minimized by the moderator on the site
Ik hoop dat iemand mij hier kan helpen.
Ik heb zoals de meeste mensen in deze discussie, een tijdvenster bestaande uit 2 tijden.
voor het gemak:
Cel A2 staat in 15:00
Cel B2 staat in 16:00
Cel C2 staat in 15:49

ik wil met een formule weten of Cel C2 binnen het tijdvak van A2 en B2 ligt.
als ik de formules kopieer van hierboven en deze aanpas naar mijn cellen(en taal), krijg ik een onjuiste formule melding.

Ik ben vrij handig in Excel... maar dit krijg ik verdorie niet voor elkaar.
(Ik heb een nederlandse versie van Excel)

de formule die ik nu probeerde te gebruiken is: =als(en(C2>=MIN(A2:B2),C2<=MAX(A2:B2)),"YES","NO")

wat doe ik fout? :(
This comment was minimized by the moderator on the site
Hello, Bastiaan
I have tested your formula in Dutch, the formula works well, please see the below screenshot:
https://www.extendoffice.com/images/stories/comments/comment-skyyang/doc-check-time-1.png
Please try again, thank you!
This comment was minimized by the moderator on the site
Hi, I am comparing hundreds of thousands of lines of data (for the first time) and needed an equation that that compares time between two of he columns. However, I cannot get away with an IF statement using A3<>F3 because the times in A3 are about 1 second off. Rather I just need to the nearest minute. Any help?
This comment was minimized by the moderator on the site
I am in need of assistance. I have been pulling my hair out over the last month trying to figure out a way to make my life simpler. I am not even sure if it can be done because I can not find anything on how to do it. My problem is this........ I recently started using a new program to collect data for incoming and outgoing employees. The data readers are sensitive and will sometimes account for an employee multiple times over the course of a couple of minutes. when I export this data into an excel file, it is an absolute nightmare trying to individually delete the extra captures. Using the remove duplicates option helps, but still leaves many duplicate times due to the Seconds in the time being different. Today for example after I removed the duplicates, I still have over 24,000 unique entries that I have to go through to get that data I need. Someone, anyone..... please Help!
This comment was minimized by the moderator on the site
I am trying to calculate time per day for example I went to the computer lab and logged in for 4hours&35minutes on Monday and Tuesday I logged in on for 2 hours and 10 minutes and Wednesday 3hours and 4 minutes and Thursday for 4 hours and 14 minutes and Friday 1 hour and 15 minutes. Add those total together and get a grand total. I want to be able to keep every minute. No rounding, I know that I have to use the IF function.
This comment was minimized by the moderator on the site
Help me in this, as if there is some time ranges in a day and i have to find out time clashing is there or not. then please suggest some formula!
This comment was minimized by the moderator on the site
Hello I have to find my specific time is in between two times...eg : Start time(AS2) is 23:00:00 and End time(AT2) is 8:00:00, specific time(J2) is 0:02:20, so when i use the formula =IF(AND(J2>=MIN(AS2:AT2),J2<=MAX(AS2:AT2)),"YES","NO") it should show yes as its in between tow times only but its showing no, any help in correcting the formula ?
This comment was minimized by the moderator on the site
Hi Santosh, That is similar to my use,I use something along the lines of;

=IF(AND(C2>=MIN("13:00"),C2<=MAX("13:10")),"YES","NO")
This comment was minimized by the moderator on the site
Hi Silver,


The formula doesn't work. If I have to enter "13:00" (hours) in each row, why there is formula, this is not making the job any easier.
This comment was minimized by the moderator on the site
If your time over midnight, you should apply the below formula:
=OR(MOD(C1,1)>TIME(23,0,0),MOD(C1,1)<TIME(8,0,0))
This comment was minimized by the moderator on the site
In the above formula, C1 is the specific time you want to check for, and the TIME(23,0,0) and TIME(8,0,0) are the two times you want to check between. You should change the references to your need.
Please try it, hope it can help you!
This comment was minimized by the moderator on the site
I have two times here 23:00:00(AS2 Start Time) and 8:00:00(AT2 End Time) and specific time is 0:02:20(J2), so when i use this formula =IF(AND(J2>=MIN(AS2:AT2),J2<=MAX(AS2:AT2)),"YES","NO"), it should come as yes as the specific time is in between our two start and end time but its showing no..any help in correcting this formula
This comment was minimized by the moderator on the site
This isn't working for me when the specific time is =NOW() to display the current time. Any suggestions?
This comment was minimized by the moderator on the site
Hello, Nikkii,

If you enter =now() function to get the current date and time, both date and time are displayed, if you need a formula to get the current time dynamically, you can apply this formula: =MOD(NOW(),1), and then format it as time format. And then, you can use the formula in this article successfully.

Please try, hope it can help you!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations