Preskoči na glavno vsebino

Kako se rezalnik vrtilne tabele premika s premikanjem delovnega lista v Excelu?

Med delom s pivot tabelo lahko vstavite rezalnike za vizualno filtriranje podatkov v tabeli. Ta članek govori o tem, da je rezalnik vrtilne tabele med drsenjem delovnega lista vedno viden.

Rezalnik vrtilne tabele naj se premika s pomikanjem delovnega lista s kodo VBA


Rezalnik vrtilne tabele naj se premika s pomikanjem delovnega lista s kodo VBA

Naslednji skript VBA vam lahko pomaga, da se rezalnik vrtilne tabele premika z delovnim listom. Naredite naslednje.

1. Pritisnite druga + F11 tipke hkrati, da odprete Microsoft Visual Basic za aplikacije okno.

2. V Ljubljani Microsoft Visual Basic za aplikacije okno, dvokliknite Ta delovni zvezek v levo podokno Project, nato pa kopirajte in prilepite spodnjo kodo VBA v ThisWorkbook (koda) okno. Oglejte si posnetek zaslona:

Koda VBA: Rezalnik vrtilne tabele naj se premika z drsenjem delovnega lista

Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
    Dim ShF As Shape
    Dim ShM As Shape
    'specify a slicer
    Application.ScreenUpdating = False
    Set ShF = ActiveSheet.Shapes("Column1")
    Set ShM = ActiveSheet.Shapes("Column2")
    'change position of the slicer
    With Windows(1).VisibleRange.Cells(1, 1)
        ShF.Top = .Top
        ShF.Left = .Left + 300
        ShM.Top = .Top
        ShM.Left = .Left + 100
    End With
    Application.ScreenUpdating = True
End Sub

Opombe:

1). V kodi sta stolpca1 in stolpec2 ime rezalnikov.

2). Med listanjem delovnega lista v kodi lahko določite položaj rezalnikov.

3). In lahko v kodo dodate več rezalnikov ali pa po potrebi odstranite rezalnike iz nje.

3. Pritisnite druga + Q tipke za zapiranje Microsoft Visual Basic za aplikacije okno pogovorno okno.

Od zdaj naprej se bodo določeni rezalniki med pomikanjem po delovnem listu premikali z aktivno celico. Oglejte si posnetek zaslona:


Sorodni članki:

Najboljša pisarniška orodja za produktivnost

🤖 Kutools AI Aide: Revolucionirajte analizo podatkov na podlagi: Inteligentna izvedba   |  Ustvari kodo  |  Ustvarite formule po meri  |  Analizirajte podatke in ustvarite grafikone  |  Prikličite funkcije Kutools...
Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup    Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule    Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic    Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

Opis


Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (10)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Okay, so the title says "How To Keep Slicer Of Pivot Table Moving With Worksheet Scrolling In Excel?", but this VBA code only does it for the current selected cell, how can we do it for the scrolling of the workbook, and not just the selected cell?
This comment was minimized by the moderator on the site
I have 4 slicers which have been grouped together by selecting all 4 and the right clicking to use the group command.

Is it possible to assign this VBA by a group? How do you label the group and write the VBA to recognize it as one?
This comment was minimized by the moderator on the site
Hi Michael,
Sorry can't help with this. Thanks for your comment.
This comment was minimized by the moderator on the site
What does the first row indicate and how do we customize it to suit our slicer?
I'm very confused about that on basically every line.
This comment was minimized by the moderator on the site
Dear Katie
I don't know if I totally understand your question.
As I mentioned in above Notes, you need to replace Column1 and Column2 with the names of your slicers in the code in order to keep your slicer scrolling with the worksheet.
This comment was minimized by the moderator on the site
Hi,
Thank you for this VBA.

I have absolutely no idea about VBA and hence my question.

I used this VBA and I had a question.
How can i alter this VBA so that it works only for one sheet.

Right now, I have 8 sheets and every time i go to another sheet, it fails and asks me to end or debug.
I have done exactly the way as shown above.


This is my VBA here..
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Dim ShF As Shape
Dim ShM As Shape
'specify a slicer
Application.ScreenUpdating = False
Set ShF = ActiveSheet.Shapes("Client 1")
Set ShM = ActiveSheet.Shapes("Reminder 1")
'change position of the slicer
With Windows(1).VisibleRange.Cells(1, 1)
ShF.Top = .Top + 2
ShF.Left = .Left + 475
ShM.Top = .Top + 180
ShM.Left = .Left + 475
End With
Application.ScreenUpdating = True
End Sub


Please help.
This comment was minimized by the moderator on the site
Dear John,
Shift to the worksheet you want the VBA code only work for, then right click the Sheet tab and select View Code from the context menu.
And then copy and paste below VBA code into the opening Code window. See below screenshot:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim ShF As Shape
Dim ShM As Shape
'specify a slicer
Application.ScreenUpdating = False
Set ShF = ActiveSheet.Shapes("Fruit")
Set ShM = ActiveSheet.Shapes("Sale")
'change position of the slicer
With Windows(1).VisibleRange.Cells(1, 1)
ShF.Top = .Top
ShF.Left = .Left + 300
ShM.Top = .Top
ShM.Left = .Left + 100
End With
Application.ScreenUpdating = True
End Sub
This comment was minimized by the moderator on the site
Hi,I have updated my code as you have indicated. The slicer no longer scrolls along with the window however if I click in a new cell then the slicer will move. Is this the correct behavior?
This comment was minimized by the moderator on the site
Dear Crystal,

Thank you so very much for the code.
I did exactly as you said and it works like a charm.

Really appreciate it.
Cheers :)
This comment was minimized by the moderator on the site
Hi,
Thank you for this VBA.

I have absolutely no idea about VBA and hence my question.

I used this VBA and I had a question.
How can i alter this VBA so that it works only for one sheet.

Right now, I have 8 sheets and every time i go to another sheet, it fails and asks me to end or debug.
I have done exactly the way as shown above.


This is my VBA here..
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Dim ShF As Shape
Dim ShM As Shape
'specify a slicer
Application.ScreenUpdating = False
Set ShF = ActiveSheet.Shapes("Client 1")
Set ShM = ActiveSheet.Shapes("Reminder 1")
'change position of the slicer
With Windows(1).VisibleRange.Cells(1, 1)
ShF.Top = .Top + 2
ShF.Left = .Left + 475
ShM.Top = .Top + 180
ShM.Left = .Left + 475
End With
Application.ScreenUpdating = True
End Sub


Please help.
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations