Preskoči na glavno vsebino

Kako skriti nedelovni čas v koledarjih v Outlooku?

Kot veste, Microsoft Outlook prikazuje cel dan od 12 do 00 v dnevnem pogledu koledarja, čeprav imamo dodeljen delovni čas. Nedelovni čas zavzame preveč prostora in uporabnike zamoti, da v minuti poiščejo točen delovni čas. Vendar v Outlooku ne morete skriti nedelovnega časa. V tem članku bom predstavil rešitev za pokrivanje nedelujočih območij z barvo v koledarjih v programu Microsoft Outlook.

 

Zavihek Office – omogočite urejanje in brskanje z zavihki v Microsoft Officeu, kar olajša delo
Kutools za Outlook – izboljšajte Outlook s 100+ naprednimi funkcijami za vrhunsko učinkovitost
Izboljšajte svoj Outlook 2021 - 2010 ali Outlook 365 s temi naprednimi funkcijami. Uživajte v obsežnem 60-dnevnem brezplačnem preizkusu in izboljšajte svojo e-poštno izkušnjo!

 


Ker nedelovnega časa Koledarju pravzaprav ni mogoče skriti, kot a rešitev, vas bomo vodili pri ustvarjanju vsakodnevnega ponavljajočega sestanka in prekrivanju nedelovnih območij z barvo. Naredite lahko naslednje:

1. korak: prestavite se na pogled koledarja in odprite določen koledar, v katerem boste skrivali nedelovni čas.

2. korak: Koledar prikažite v Dan pogled s klikom na Spremeni pogled > Koledar in Dan ločeno na gumbu Poglej tab.

 

Opomba: V programu Outlook 2007 lahko kliknete Poglej > Trenutni pogled > Dan / teden / mesecin nato kliknite Dan gumb nad koledarjem.

3. korak: ustvarite nov sestanek z:

  1. V Outlooku 2010 in novejših različicah kliknite Novo imenovanje gumb na HOME zavihek;
  2. V programu Outlook 2007 kliknite file > Novo > Imenovanje.

4. korak: V novem oknu za imenovanje določite temo in lokacijo ter kliknite Ponovitev gumb na Imenovanje tab.

5. korak: Zdaj v pogovornem oknu Ponovitev imenovanja

(1) V Začetek vnesite čas, ko vsak dan končate z delom, na primer 6:00;

(2) V konec v polje vnesite čas, ko vsak dan začnete z delom, na primer ob 9:00;

(3) Preverite dnevni v Vnovični vzorec odsek;

(4) Preverite Brez končnega datuma v Obseg ponovitve odsek;

(5) Kliknite OK gumb.

6. korak: Zdaj se vrnete v okno za sestanek in kliknete Pokaži kot polje na Imenovanje kartico in izberite Brez urada s spustnega seznama. Oglejte si spodnji posnetek zaslona:

7. korak: Sestavite ta novi sestanek in kliknite Shrani in zapri gumb.

Nato boste videli, da so vsi drugi delovni čas v dnevnem pogledu koledarja zajeti z barvo od drugega dne ponavljajočega se obdobja.

 


Najboljša pisarniška orodja za produktivnost

Kutools za Outlook - Več kot 100 zmogljivih funkcij za nadgradnjo vašega Outlooka

🤖 AI poštni pomočnik: Takojšnja profesionalna e-poštna sporočila z umetno inteligenco – z enim klikom do genialnih odgovorov, popoln ton, večjezično znanje. Preoblikujte pošiljanje e-pošte brez napora! ...

📧 Avtomatizacija e-pošte: Odsoten (na voljo za POP in IMAP)  /  Načrtujte pošiljanje e-pošte  /  Samodejna CC/BCC po pravilih pri pošiljanju e-pošte  /  Samodejno naprej (napredna pravila)   /  Samodejno dodaj pozdrav   /  E-poštna sporočila več prejemnikov samodejno razdeli na posamezna sporočila ...

📨 Email upravljanje: Enostaven priklic e-pošte  /  Blokiraj prevarantska e-poštna sporočila glede na teme in druge  /  Izbriši podvojena e-poštna sporočila  /  napredno iskanje  /  Združite mape ...

📁 Priloge ProShrani paket  /  Batch Detach  /  Paketno stiskanje  /  Samodejno shranite   /  Samodejno loči  /  Samodejno stiskanje ...

🌟 Vmesnik Magic: 😊Več lepih in kul emojijev   /  Povečajte Outlookovo produktivnost s pogledi z zavihki  /  Minimizirajte Outlook, namesto da bi ga zaprli ...

???? Čudeži z enim klikom: Odgovori vsem z dohodnimi prilogami  /   E-poštna sporočila proti lažnemu predstavljanju  /  🕘Pokaži pošiljateljev časovni pas ...

👩🏼‍🤝‍👩🏻 Stiki in koledar: Paketno dodajanje stikov iz izbranih e-poštnih sporočil  /  Razdelite skupino stikov na posamezne skupine  /  Odstranite opomnike za rojstni dan ...

Over 100 Lastnosti Čakajte na svoje raziskovanje! Kliknite tukaj, če želite odkriti več.

 

 

 

Comments (26)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Under the View Ribbon, trying changing the "Time Scale" to 15 or 30min. It pushes the non-work hours off the screen so you are looking only at the workday. MSFT defaults to 60min increments.
This comment was minimized by the moderator on the site
to all of you that are still searching for an answer: it is not possible but you can zoom to something like 115% somehwere near the bottom right of your screen to sort of "hide" the night hours. I hope Outlook saves that setting
This comment was minimized by the moderator on the site
The zoom in answer worked perfectly and is exactly what I was looking for. 115% is bang on. Thanks
This comment was minimized by the moderator on the site
what a truly awful 'hack'. Is this the first time you have used a computer?
This comment was minimized by the moderator on the site
Try this. Doesn't necessarily hide, but does focus on working hours.

I was able to do this by going to View > Change View > Choose Preview (It was set to Calendar)

It then reverted back to my working hours display as opposed to a 24 hour display (which is not ideal)
This comment was minimized by the moderator on the site
"Choose Preview" worked perfectly.  Thanks Bobby.
This comment was minimized by the moderator on the site
much more helpful than the article itself - thanks
This comment was minimized by the moderator on the site
Thank you. This was actually helpful.
This comment was minimized by the moderator on the site
Send me 9.95 for ver3 of this amazing hack. Free picture of Houdini included. He wont disappear, but your non working hours WILL. Guaranteed. Or Sue Me.
This comment was minimized by the moderator on the site
this article is the suck.
This comment was minimized by the moderator on the site
Garbage article.
This comment was minimized by the moderator on the site
It isn't exactly what we want ... but .... there is a little slide bar on the bottom right side of the calendar screen. If you increase the size you can then adjust your screen and then set the scroll bar on the right side to start at your beginning time. Not a true fix for what we want, but it gets us closer. :/
This comment was minimized by the moderator on the site
That's so much better than what's in the article. Thank you so much for that. Thank god for comments to articles.
This comment was minimized by the moderator on the site
I couldn't get this to work for me.
The scroll bar just moves the calendar up and down like it should, it doesn't seem to focus the view or hide the out of hours times.
the small scroll bar in the bottom right just scales the screen up and down.....

Any help?
This comment was minimized by the moderator on the site
Kudos to Nancy!.....still making people's day 4 year later.
Rated 5 out of 5
This comment was minimized by the moderator on the site
thumbs up!
This comment was minimized by the moderator on the site
This is a better solution than the article provided. Thanks!
This comment was minimized by the moderator on the site
WHOOHOO that did it. Use the SCroll bar, increased the view and then the DAY view does not overlap appointments. Thank you for the answer.
This comment was minimized by the moderator on the site
Thank you... I find your respond more helpful than the article. Didn't realize I can use the scroll bar...
This comment was minimized by the moderator on the site
I agree this article is a total waste of time and the title is misleading. Whoever is the author, please get a different job.
This comment was minimized by the moderator on the site
This page does nothing to address "How To Hide Non-Working Hours In Calendars In Outlook?". Don't waste your time! It's deceptive and should be removed!!!
This comment was minimized by the moderator on the site
Unfortunately this is at the end of the page.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations