Preskoči na glavno vsebino

Kako prikazati koledar v dvotedenskem pogledu v Outlooku?

Avtor: Kelly Zadnja sprememba: 2014-09-29

Ko običajno prikažemo koledar v tedenskem pogledu v Outlooku, običajno prikaže samo en teden tega koledarja. Za ogled zadnjega / naslednjega tedna v tem koledarju morajo uporabniki Outlooka na vrhu koledarja klikniti gumb Nazaj / naprej. Oglejte si posnetek zaslona:

Pravzaprav lahko v Outlooku enostavno prikažemo samo dva sosednja tedna v koledarju. Oglejte si spodnji posnetek zaslona:

Zavihek Office – omogočite urejanje in brskanje z zavihki v Microsoft Officeu, kar olajša delo
Odklenite Kutools za Outlook brezplačno različica zdaj in uživajte v več kot 70 funkcijah z neomejenim dostopom za vedno
Izboljšajte svoj Outlook 2021 - 2010 ali Outlook 365 s temi naprednimi funkcijami. Uživajte v 70+ zmogljivih funkcijah in izboljšajte svojo e-poštno izkušnjo!

V mesečnem pogledu koledarja v Outlooku je zelo enostavno prikazati dva sosednja tedna. In lahko naredite naslednje:

Najprej se pomaknite na pogled koledarja in pojdite v mapo koledarja, ki jo želite prikazati v dvotedenskem pogledu.

Prepričajte se, da je koledar v pogledu koledarja. V nasprotnem primeru preklopite na pogled koledarja s klikom na Spremeni pogled > Koledar o Poglej (ali kliknite Poglej > Trenutni pogled > Dan / teden / mesec v programu Outlook 2007).

Drugič, pojdite na Navigator za datum na vrhu podokna za krmarjenje in izberite sosednja dva tedna, glejte posnetek zaslona spodaj:

Če je vaš koledar prikazan v pogledu Dan / Delovni teden / Teden / Mesec, bo po izbiri dveh sosednjih tednov v Navigatorju po datumu prikazal izbrana dva tedna samo v mesečnem pogledu trenutnega koledarja. Glej posnetek zaslona zgoraj.

Če je vaš koledar prikazan v pogledu razporeda, bo po izbiri dveh sosednjih tednov v navigatorju datumov prikazal izbrana dva tedna v pogledu razporeda.


Najboljša pisarniška orodja za produktivnost

Izjemne novice: Zažene se Kutools for Outlook Brezplačna različica!

Izkusite popolnoma nove Kutools za Outlook BREZPLAČNA različica s 70+ neverjetnimi funkcijami, vaša za uporabo ZA VEDNO! Kliknite za prenos zdaj!

🤖 Kutools AI : Takojšnja profesionalna e-poštna sporočila z umetno inteligenco – z enim klikom do genialnih odgovorov, popoln ton, večjezično znanje. Preoblikujte pošiljanje e-pošte brez napora! ...

📧 Avtomatizacija e-pošte: Samodejni odgovor (na voljo za POP in IMAP)  /  Načrtujte pošiljanje e-pošte  /  Samodejna CC/BCC po pravilih pri pošiljanju e-pošte  /  Samodejno naprej (napredna pravila)   /  Samodejno dodaj pozdrav   /  E-poštna sporočila več prejemnikov samodejno razdeli na posamezna sporočila ...

📨 Email upravljanje: Odpoklic e-pošte  /  Blokiraj prevarantska e-poštna sporočila glede na teme in druge  /  Izbriši podvojena e-poštna sporočila  /  napredno iskanje  /  Združite mape ...

📁 Priloge ProShrani paket  /  Batch Detach  /  Paketno stiskanje  /  Samodejno shranite   /  Samodejno loči  /  Samodejno stiskanje ...

🌟 Vmesnik Magic: 😊Več lepih in kul emojijev   /  Opomni vas, ko pridejo pomembna e-poštna sporočila  /  Minimizirajte Outlook, namesto da bi ga zaprli ...

???? Čudeži z enim klikom: Odgovori vsem z dohodnimi prilogami  /   E-poštna sporočila proti lažnemu predstavljanju  /  🕘Pokaži pošiljateljev časovni pas ...

👩🏼‍🤝‍👩🏻 Stiki in koledar: Paketno dodajanje stikov iz izbranih e-poštnih sporočil  /  Razdelite skupino stikov na posamezne skupine  /  Odstranite opomnike za rojstni dan ...

Takoj odklenite Kutools za Outlook z enim klikom—trajno brezplačno. ne čakaj, prenesite zdaj in povečajte svojo učinkovitost!

 

 

 

Comments (13)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Thanks - this worked, but it was a bit more convoluted than is necessary. This is easier...

* Toggle to the Calendar view.

* Using the small navigational calendar in the top left corner, simply hold down the "CTRL" button, and using your mouse, highlight the range of dates that you want your view to be - in this example, start with the current day, and highlight the next 13 days.

* You should now have a 14 day (2 week) view in your calendar.

* Now goto the VIEW > CHANGE VIEW menu options, and select "Select current view as a new view". When the dialogue box pops up, name it something like "2 Week View" - and you're done.

You should now find that whenever you toggle out calendar view, to email or contact or whatever, when you come back to the Calendar tab that it's still showing your new, customer 2 week view.
This comment was minimized by the moderator on the site
So, I have followed Scott's instructions several times (thanks!). Each time, the calendar looks great, two weeks displayed in two rows, but when I save it, it changes to show only three days. Anyone have a solution or know what I am doing wrong?
This comment was minimized by the moderator on the site
Thank you Scott, for providing the information we were actually after. The method outlined in the original article sucks balls.
This comment was minimized by the moderator on the site
I too would like to know how to have it always display 2 weeks at a time. This is pretty much the only way I view my calendar so every time I go in I have to select the 2 weeks.
This comment was minimized by the moderator on the site
So here's how to get a 2 week view maintaining the current day as the first day of the view and keep it as the default calendar view (works in Outlook 360 and I assume this works for previous editions) 1. Click calendar "Day" view so only one day appears 2. Hold down ALT and zero 3. In the calendar navigator 10 days in advance will be highlighted 4. Hold down the CTRL key and click the additional 4 days in navigator (following the 10 already highlighted) so you can now see a "14 day view" 5. Now click the VIEW tab, then click Change View>Save current View as a New View and accept whatever default name is offered Hope this helps you as it did me!
This comment was minimized by the moderator on the site
Wow! This is the first time I've seen instructions to create a 2 week calendar default view that actually work! Thank you! One more question, tho...is there a way to make the two weeks one above the other? (week one above week 2)
This comment was minimized by the moderator on the site
Brilliant...! Thank you.
This comment was minimized by the moderator on the site
THANKS - I was o looking for this!
This comment was minimized by the moderator on the site
Thanks so much for sharing this! In my version, this makes 14 continuous days appear (14 columns) instead of 2 rows of 7 days each. Am I doing something wrong or is this how it shows up for you as well?
This comment was minimized by the moderator on the site
use the mouse pointer only to highlight the days in the calendar box (no shift, ctrl, etc.) just hold down the pointer and drag across the days you want
This comment was minimized by the moderator on the site
This did not work when I used the numbers from the 10 key number pad on the side, but when I used the numbers across the top of the keyboard it works. Your explanation of the steps was more clear than others I've read. Thanks
This comment was minimized by the moderator on the site
this is exactly what I needed. THANK YOU SO VERY MUCH FOR SHARING THIS INFO!!!!!!
This comment was minimized by the moderator on the site
No -- This only works for 30-50 seconds; then there is some kind of refresh/update event which resets the view to Month view. How can you make the 2-week view persist indefinitely and not be automatically reset to Month ever minute? Thank you.
There are no comments posted here yet
Leave your comments
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations