Preskoči na glavno vsebino

Kako si ogledati domeno pošiljateljev na poštnem seznamu v Outlooku?

Ali ste v Outlooku sploh prejeli nekaj e-poštnih sporočil od nenavadnih pošiljateljev, na katerih je na seznamu pošte prikazano samo prikazno ime pošiljateljev? Oglejte si naslednji posnetek zaslona. Nekateri uporabniki Outlooka se morda zdijo varnejši, če pridobijo e-poštno domeno pošiljateljev, preden odprejo e-poštna sporočila. V tem članku vam bom pokazal, kako si ogledate ali prikažete e-poštne domene pošiljateljev na poštni seznam v programu Microsoft Outlook.

Zavihek Office – omogočite urejanje in brskanje z zavihki v Microsoft Officeu, kar olajša delo
Kutools za Outlook – izboljšajte Outlook s 100+ naprednimi funkcijami za vrhunsko učinkovitost
Izboljšajte svoj Outlook 2021 - 2010 ali Outlook 365 s temi naprednimi funkcijami. Uživajte v obsežnem 60-dnevnem brezplačnem preizkusu in izboljšajte svojo e-poštno izkušnjo!

Če si želite ogledati ali prikazati e-poštne domene pošiljateljev na poštni seznam v programu Microsoft Outlook, lahko sledite tem načinom, da ga dobite.

1. korak: Odprite poštno mapo, v kateri boste videli ali prikazali e-poštne domene pošiljateljev.

Korak 2: Kliknite na Dodaj stolpce gumb na Poglej tab.

Opombe: V programu Outlook 2007 lahko kliknete Poglej > Trenutni pogled > Prilagodite trenutni pogledin nato kliknite Področja v pojavnem oknu Prilagodi pogled: Kompaktno pogovorno okno.

3. korak: V prihajajočem pogovornem oknu Prikaži stolpce (ali Prikaži polja) kliknite Nov stolpec gumb (ali Novo polje gumb).

3. korak: Zdaj odprete pogovorno okno Nov stolpec (ali Novo polje) in:

(1) V Ime polje vnesite novo ime za ta stolpec za ustvarjanje.

(2) Kliknite tip in izberite polje Formula s spustnega seznama.

(3) Kliknite Uredi in nato vnesite naslednje besedilo v Formula okno pogovornega okna. Oglejte si spodnji posnetek zaslona:

desno ([SearchFromEmail], len ([SearchFromEmail]) - InStr (1, [SearchFromEmail], "@"))

(4) Kliknite obe OK gumbi za zapiranje dveh pogovornih oken.

4. korak: Zdaj se vrnete v pogovorno okno Pokaži stolpce (ali Pokaži polja) in izberite nov ustvarjeni stolpec v pokaži te stolpce v tem vrstnem redu polje in ga premaknite spodaj od. Oglejte si spodnji posnetek zaslona:

Korak 5: Kliknite na OK gumbi.

Zdaj boste videli, da je dodana e-poštna domena vsakega pošiljatelja in prikazana pod prikaznim imenom pošiljatelja. Oglejte si naslednji posnetek zaslona:

Če želite dobiti način za shranjevanje tega pogleda po meri v Outlooku, kliknite Kako shraniti in kopirati nastavitve pogleda v druge mape v Outlooku?


puščica modri desni mehurčekPovezani članek

Kako razvrstiti in razvrstiti po domeni pošiljatelja v Outlooku?


Najboljša pisarniška orodja za produktivnost

Kutools za Outlook - Več kot 100 zmogljivih funkcij za nadgradnjo vašega Outlooka

📧 Avtomatizacija e-pošte: Odsoten (na voljo za POP in IMAP)  /  Načrtujte pošiljanje e-pošte  /  Samodejna CC/BCC po pravilih pri pošiljanju e-pošte  /  Samodejno naprej (napredna pravila)   /  Samodejno dodaj pozdrav   /  E-poštna sporočila več prejemnikov samodejno razdeli na posamezna sporočila ...

📨 Email upravljanje: Enostaven priklic e-pošte  /  Blokiraj prevarantska e-poštna sporočila glede na teme in druge  /  Izbriši podvojena e-poštna sporočila  /  napredno iskanje  /  Združite mape ...

📁 Priloge ProShrani paket  /  Batch Detach  /  Paketno stiskanje  /  Samodejno shranite   /  Samodejno loči  /  Samodejno stiskanje ...

🌟 Vmesnik Magic: 😊Več lepih in kul emojijev   /  Povečajte Outlookovo produktivnost s pogledi z zavihki  /  Minimizirajte Outlook, namesto da bi ga zaprli ...

???? Čudeži z enim klikom: Odgovori vsem z dohodnimi prilogami  /   E-poštna sporočila proti lažnemu predstavljanju  /  🕘Pokaži pošiljateljev časovni pas ...

👩🏼‍🤝‍👩🏻 Stiki in koledar: Paketno dodajanje stikov iz izbranih e-poštnih sporočil  /  Razdelite skupino stikov na posamezne skupine  /  Odstranite opomnike za rojstni dan ...

Over 100 Lastnosti Čakajte na svoje raziskovanje! Kliknite tukaj, če želite odkriti več.

 

 

Comments (30)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
I receive emails from team members that are no longer with the company, and they are just aliases on my exchange account. When someone sends an email to one of the alias's it shows addressed to me unless i look at the header properties. Is there a way to get outlook to show who the original email address was sent to instead of me?
This comment was minimized by the moderator on the site
Спасибо, а есть формула, чтобы в отправленных был виден адрес "кому отправлено"?
This comment was minimized by the moderator on the site
Hi there,

You can first select the Sent box, and then do as instructed in the artcile, but use the code: right([To],len([To])-InStr(1,[To],"@"))
Note that if you have more than one recipients, it will show the domain of the first recipient and full address of other recipients.

If you want to show Cc and Bcc recipients as well, you can create two more columns by following the exact steps. Remember to change [To] in the code right([To],len([To])-InStr(1,[To],"@")) to corresponding code: [Cc] or [Bcc]

Amanda
This comment was minimized by the moderator on the site
К сожалению, формула вставляет только имя получателя, но не его e-mail
This comment was minimized by the moderator on the site
Go to View > View settings > Columns
Click "new Columns"

Name : External
Type : FormulaFormula : IIf(InStr([SearchFromEmail],"@")=0,"",Left([SearchFromEmail],InStr([SearchFromEmail],"@")-1)+"@"+Mid([SearchFromEmail],InStr([SearchFromEmail],"@")+1))

Click OK..Ok..


This comment was minimized by the moderator on the site
I wish it would work for "SearchToEmail" as well. But this is only wishful thinking ...
This comment was minimized by the moderator on the site
Great Solution - works 99% of the time.  Almost every email now shows the 'Name' of the sender and immediately below the name, it shows the domain as well. 
ISSUE: The initial suspicious email that triggered this concern still shows a blank line under the sender's name.  Thoughts?
This comment was minimized by the moderator on the site
I agree with Matt. The string from themoonandthelily, "right(([SearchFromEmail],[SearchFromEmail]),InStr(1,[SearchFromEmail],"@"))", causes Outlook to crash, closing it immediately when selecting an email.

Too bad, because it was a very welcome addition.
This comment was minimized by the moderator on the site
Why does SearchToEmail not work? All the solutions are for the From column only.
This comment was minimized by the moderator on the site
I really loved this solution. However, my outlook keeps on crashing with the addition of this new column. I spent hours on with Microsoft tech support and they said to delete this column and that it seems to be an issue with Outlook. Really would love another solution to put senders address into the message preview. Disappointed that Microsoft support couldn't offer me any solutions to the crashing except for running Outlook in "cleanviews" :(
This comment was minimized by the moderator on the site
Anyone can provide a formula edit which show sender's domain or e-mail address, BUT from headers of e-mail - from Received: field. That would be useful for determine if the e-mail is spoofed or it's real!
This comment was minimized by the moderator on the site
Yes this is what I would prefer as well. Have you come across something like this yet?
This comment was minimized by the moderator on the site
Muy bueno..Thanks :)
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations