Preskoči na glavno vsebino

Kako dobiti poziv ali potrditev pred pošiljanjem e-pošte v Outlooku?

Velikokrat ste poslali e-poštno sporočilo in ugotovili, da ste nekaj sekund pozneje pogrešali kaj pomembnega ali se v e-poštnem sporočilu pojavi kaj narobe. Kako se izogniti pošiljanju neprijetnega e-poštnega sporočila v Outlooku? Pravzaprav lahko znova potrdite pošiljanje e-pošte, potem ko v Outlooku pritisnete gumb Pošlji. Metoda v tem članku vam lahko pomaga prikazati težavo.

Pred pošiljanjem e-pošte s kodo VBA dobite poziv ali potrditev


Pred pošiljanjem e-pošte s kodo VBA dobite poziv ali potrditev

Naslednja koda VBA vam lahko pomaga znova potrditi pošiljanje e-pošte po pritisku na gumb Pošlji v Outlooku. Naredite naslednje.

1. Pritisnite druga + F11 tipke za odpiranje Microsoft Visual Basic za aplikacije okno.

2. V Ljubljani Microsoft Visual Basic za aplikacije okno, dvokliknite, da odprete Ta OutlookSession okno kode in nato pod kodo VBA kopirajte v okno kode.

Koda VBA: pridobite potrditev pred pošiljanjem e-pošte v programu Outlook

Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean)
Dim xPrompt As String
Dim xOkOrCancel As Integer
On Error Resume Next
xPrompt = "Do you want to continue sending the email?"
xOkOrCancel = MsgBox(xPrompt, vbOKCancel)
If xOkOrCancel <> vbOK Then
    Cancel = True
End If
End Sub

3. Pritisnite druga + Q tipke za zapiranje Microsoft Visual Basic za aplikacije okno.

Od zdaj naprej, ko zadenete Pošlji gumb za pošiljanje e-pošte v Outlooku, se bo pojavilo potrditveno pogovorno okno, kot je prikazano na spodnji sliki. Kliknite OK če želite poslati to e-pošto, kliknite Prekliči da nadaljujete s sestavljanjem e-pošte.

Najboljša pisarniška orodja za produktivnost

🤖 Kutools AI Aide: Revolucionirajte analizo podatkov na podlagi: Inteligentna izvedba   |  Ustvari kodo  |  Ustvarite formule po meri  |  Analizirajte podatke in ustvarite grafikone  |  Prikličite funkcije Kutools...
Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup    Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule    Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic    Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

Opis


Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Clicking on cancel , sends the message
This comment was minimized by the moderator on the site
Hi, I get an error message when I run this VBA code.The error is "Compile error: Sub or function not defined."
This comment was minimized by the moderator on the site
Hi the code is giving me an error saying "Compile error: Sub or Function not defined."What would be the cause for this?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
The solution worked for me once but I couldn't get it to work for me again. Any suggestions how to do that?
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
This worked one time, after tha never worked again.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Hi There,

For some reason, mine, it works well only for one day. The codes don't seem to work anymore the next day, although those codes remained intact,

Anyone has such experience and know why?

Thanks.
This comment was minimized by the moderator on the site
The reason it doesn't work when you restart Outlook is a secuirty one - the macro is not trusted by default, you have to self certify it. Follow the instructions on this site and it will all work fine after every restart... https://www.howto-outlook.com/howto/selfcert.htm
This comment was minimized by the moderator on the site
Seeing same issue, any desired solution?
This comment was minimized by the moderator on the site
Same issue, it doesn't work for next day or after relaunching outlook, any solution?
This comment was minimized by the moderator on the site
Hi, i've got the same experience. Not sure yet how to solve this, i'm very new to VBA.
Would like to hear from you if you found a fix.
This comment was minimized by the moderator on the site
Hello! Very useful and it works perfectly.

Is it possible to adjust the code so that it only pops up when there is an attachment? Similarly, is it possible to adjust it so it prompts the pop-up only when the message is sent externally (not to people of the company)?
This comment was minimized by the moderator on the site
Hi There

Is it possible to get a message to come up only when an attachment is present, and only when sent externally?

Thank you very much!

Daniel
This comment was minimized by the moderator on the site
If you want the pop-up to only happen when you send to several emails, i.e. >10, how do you do that?

Oh and thanks, it works like a treat.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations