Preskoči na glavno vsebino

Preprosto branje / ogled velikega števila vrstic in stolpcev v Excelu

Kutools za Excel

Izboljša Excel s 300+
Zmogljive lastnosti

Če delate na delovnem listu, ki vsebuje ogromno podatkov s stotinami vrstic in stolpcev, boste morda zlahka dobili uganko med preverjanjem in preskakovanjem podatkov iz enega v drugega, kar bo izgubljalo čas. Za rešitev te težave pripomoček Grid Focus programa Kutools for Excel poudari čez vrstico in stolpec, da postane aktivna celica ali obseg izjemen, kot je prikazano na spodnjem posnetku zaslona. Predstavitev

postavitev branja posnetkov 2


Omogočite pripomoček Grid Focus

klik Kutools > Mrežni fokus če želite omogočiti ta pripomoček, je zavihek označen, medtem ko je žarišče mreže omogočeno.
postavitev branja posnetkov 2


Nastavitve fokusa mreže

Če želite spremeniti nastavitve, kot so oblike, slogi, barve ali prosojnost, pojdite na Nastavitev fokusa mrežes pogovorno okno za spremembo.

klik Kutools in pojdite na puščico zraven Mrežni fokus če želite razširiti spustni meni, nato kliknite Nastavitve fokusa mreže.
postavitev branja posnetkov 2

v Nastavitve fokusa mreže v pogovornem oknu lahko spremenite oblike, sloge, barve in preglednost, kot jih potrebujete, hkrati pa si lahko predogledate spremembe v predogled pred uporabo sprememb.
postavitev branja posnetkov 2

O meni Označite območje aktivne celice in Označite območje urejanja celice opcije.

Odkljukajte Označite območje aktivne celice možnost, bo označena aktivna celica ali obseg.

postavitev branja posnetkov 2

Odstrani Označite območje aktivne celice možnost, vendar označite Označite območje urejanja celice možnost, aktivna celica ali obseg ne bo označena, bo pa označeno prelivno območje.

postavitev branja posnetkov 2

Odznačite obe Označite območje aktivne celice in Označite območje urejanja celice tako aktivna celica ali obseg kot prelivajoče se območje ne bodo označeni.

postavitev branja posnetkov 2

Omogoči fokus mreže: ob nastavitvah označite to možnost in kliknite OK, bo žarišče mreže samodejno omogočeno.

Privzete nastavitve: kliknite ta gumb, nastavitve Grid Focus so bile ponastavljene na privzete nastavitve Kutools.


Opombe:

1. Ta pripomoček lahko prekličete s klikom na Mrežni fokus ukaz se zavihek spremeni v svetlo sivo.

2. Če odprete več datotek Excel, to Mrežni fokus funkcija se uporablja za vse.

3. To Mrežni fokus pri naslednjem zagonu delovnega zvezka ne bo samodejno omogočen.

Predstavitev fokusa mreže


Kutools za Excel: Več kot 300 priročnih orodij na dosegu roke! Začnite 30-dnevno brezplačno preskusno obdobje brez omejitev funkcij še danes. Download Now!

    Priporočena orodja za produktivnost
    Naslednja orodja vam lahko v veliki meri prihranijo čas in denar, katero je najbolj primerno za vas?
    Zavihek Office: Uporaba priročnih zavihkov v pisarni, kot način Chrome, Firefox in New Internet Explorer.
    Kutools za Excel: Več kot 300 naprednih funkcij za Excel 2021, 2019, 2016, 2013, 2010, 2007 in Office 365.

    Kutools za Excel

    Zgoraj opisana funkcionalnost je le ena izmed 300 zmogljivih funkcij Kutools za Excel.

    Zasnovan za Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 in Office 365. Brezplačen prenos in uporaba 30 dni.

    Posnetek zaslona Kutools za Excel

    btn preberi več      btn prenos     btn nakup

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations