Preskoči na glavno vsebino

Kako v Excelu poudariti samo prvo vrstico ali prvo besedo v celici?

Avtor: Siluvia Zadnja sprememba: 2020-11-20

Na Excelovem delovnem listu je lahko veliko celic, ki vsebujejo več vrstic, ki so bile označene s tipkami Alt + Enter. V nekaterih primerih boste morda morali v teh celicah poudariti samo prvo vrstico. Ali samo krepko prvo besedo, da je v celicah izjemna. Ta članek podrobno prikazuje dva načina, kako ga lahko dosežete.

Krepko samo prva vrstica v celici s kodo VBA Krepko samo prva beseda v celici s kodo VBA


Krepko samo prva vrstica v celici s kodo VBA

Naslednja koda VBA vam lahko pomaga hitro poudariti samo prvo vrstico v izbranih celicah. Naredite naslednje.

1. Pritisnite druga + F11 tipke hkrati, da odprete Microsoft Visual Basic za aplikacije okno.

2. V Ljubljani Microsoft Visual Basic za aplikacije okno, kliknite Vstavi > Moduli. Nato kopirajte in prilepite spodnjo kodo VBA v okno modula.

Koda VBA: krepko samo prva vrstica v celicah

Option Explicit
Sub BoldFirstLine()
Dim xRng As Range, xCell As Range
Dim xFirstRow As String
On Error Resume Next
Set xRng = Application.InputBox("Please select range:", "Kutools for", Selection.Address, , , , , 8)
If xRng Is Nothing Then Exit Sub
On Error Resume Next
For Each xCell In xRng
    With xCell
        .Characters(1, InStr(.Value, Chr(10))).Font.Bold = True
    End With
Next
End Sub

3. Pritisnite F5 tipko za zagon kode. Potem a Kutools za Excel Pojavi se pogovorno okno, izberite obseg s prvo vrstico, ki jo želite označiti krepko, in nato kliknite OK gumb.

Nato lahko vidite, da so vse prve vrstice izbranih celic takoj krepke, kot je prikazano spodaj.


Krepko samo prva beseda v celici s kodo VBA

Kot je prikazano spodaj na sliki zaslona, ​​morate včasih prvo besedo poudariti samo v območju A2: A4 v Excelu. To lahko dosežete po korakih.

1. Pritisnite druga + F11 tipke hkrati, da odprete Microsoft Visual Basic za aplikacije okno.

2. V Ljubljani Microsoft Visual Basic za aplikacije okno, kliknite Vstavi > Moduli. Nato kopirajte in prilepite spodnjo kodo VBA v okno modula.

Koda VBA: krepko samo prva beseda v celicah

Sub boldtext()
Dim xRng As Range, xCell As Range
On Error Resume Next
Set xRng = Application.InputBox("Please select range:", "Kutools fro Excel", Selection.Address, , , , , 8)
If xRng Is Nothing Then Exit Sub
On Error Resume Next
For Each xCell In xRng
  If xCell.Value <> "" Then
    xCell.Characters(1, InStr(1, xCell.Value, " ") - 1).Font.Bold = True
  End If
Next
End Sub

3. Pritisnite F5 tipko za zagon kode. V pojavnem oknu Kutools za Excel v pogovornem oknu izberite obseg, v katerem želite, da je prva beseda krepka, in pritisnite na OK . Oglejte si posnetek zaslona:

Potem lahko vidite, da so vse prve besede izbranih celic takoj krepke, kot je prikazano spodaj.


Povezani članek:

Najboljša pisarniška orodja za produktivnost

🤖 Kutools AI Aide: Revolucionirajte analizo podatkov na podlagi: Inteligentna izvedba   |  Ustvari kodo  |  Ustvarite formule po meri  |  Analizirajte podatke in ustvarite grafikone  |  Prikličite funkcije Kutools...
Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup    Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule    Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic    Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

Opis


Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (11)
Rated 5 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
Thank you! Works perfect.
This comment was minimized by the moderator on the site
Hello,

How to bold only the Last line of the cell?
This comment was minimized by the moderator on the site
Hi Spulber,
The following VBA code can help you bold only the last line of each cell in the selected range.
Please note that if a cell has only one line (i.e., no line breaks), then the entire cell content will be bolded. If a cell is empty or contains only numerical values, this subroutine will not affect it.

Option Explicit
'Updated by Extendoffice 20230721
Sub BoldLastLine()
    Dim xRng As Range, xCell As Range
    Dim xLastLineStart As Long
    Dim xTextLength As Long
    
    On Error Resume Next
    Set xRng = Application.InputBox("Please select range:", "Kutools for Excel", Selection.Address, , , , , 8)
    
    If xRng Is Nothing Then Exit Sub
    On Error GoTo 0
    
    For Each xCell In xRng
        With xCell
            xTextLength = Len(.Value)
            xLastLineStart = InStrRev(.Value, Chr(10)) + 1
            If xLastLineStart > xTextLength Then xLastLineStart = 1
            .Characters(xLastLineStart, xTextLength).Font.Bold = True
        End With
    Next
End Sub
This comment was minimized by the moderator on the site
This is fantastic, thanks so much!
Rated 5 out of 5
This comment was minimized by the moderator on the site
Hi. I have many cells that contain multiple lines which were paragraphed by Alt+Enter. I would like to bold and change the color of the first word of each line. Can you help please?
This comment was minimized by the moderator on the site
Hi I have quite a few lines in a cell . I want for make 5th line as bold and italics in a cell . The below code makes only the first line . Can you help

Sub bold()


Dim r As Range, c As Range
Dim ws As Worksheet

Set ws = ActiveSheet
Set r = ws.Range("Y:Y")
For Each c In r
With c
.Font.bold = False
.Value = .Text
.Characters(1, InStr(.Text, vbLf) - 1).Font.bold = True
End With

Next c


End Sub
This comment was minimized by the moderator on the site
How about if I want the second line to be bold?
This comment was minimized by the moderator on the site
Good Day!
If you want to bold only the second line of the cell, please try the following VBA code:

Sub BoldSecondLine()
Dim xRng As Range, xCell As Range
Dim xArr
On Error Resume Next
Set xRng = Application.InputBox("Please select range:", "Kutools for", Selection.Address, , , , , 8)
If xRng Is Nothing Then Exit Sub
For Each xCell In xRng
If xCell <> "" Then
With xCell
xArr = Split(xCell, Chr(10))
.Characters(InStr(.Value, Chr(10)) + 1, Len(xArr(1))).Font.Bold = True
End With
End If
Next
End Sub
This comment was minimized by the moderator on the site
Hi, How about if I want the first three words to be bold?
This comment was minimized by the moderator on the site
Good Day,
Please try below VBA script.

Sub boldtext()
Dim xRng As Range, xCell As Range
Dim xNum As Long, xCount As Long
Dim I As Long, J As Long
Dim xArr
Dim xArrChr10
On Error Resume Next
Set xRng = Application.InputBox("Please select range:", "Kutools fro Excel", Selection.Address, , , , , 8)
If xRng Is Nothing Then Exit Sub
For Each xCell In xRng
xNum = 0
xCount = 0
xArrChr10 = Split(xCell.Value, Chr(10))
For I = 0 To UBound(xArrChr10)
xArr = Split(xArrChr10(I))
For J = 0 To UBound(xArr)
If xArr(J) <> "" Then
xCount = xCount + 1
If xCount > 3 Then Exit For
End If
xNum = xNum + Len(xArr(J)) + 1
Next
Next
xCell.Characters(1, xNum).Font.Bold = True
Next
End Sub
This comment was minimized by the moderator on the site
HI, how about if i want the first two lines to be bold?
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations