Preskoči na glavno vsebino

Kako spremeniti barvo mehurčkastega grafikona glede na kategorije v Excelu?

Če želite spremeniti različne barve mehurčkov glede na različne kategorije v grafikonu oblačkov v Excelu, kot je prikazano spodaj, je ta vadnica lahko v pomoč.
doc-barva-mehurčka-1

Spremenite barvo mehurčkastega grafikona glede na kategorije

puščica modri desni mehurček Spremenite barvo mehurčkastega grafikona glede na kategorije

1. Vrednosti osi x morate najprej kopirati in jih najprej prilepiti v prazen stolpec poleg prvotnega obsega podatkov.

doc-barva-mehurčka-2

2. Nato vnesite imena kategorij v celice tik nad obsegom podatkov in med dvema kategorijama ohranite prazno celico. Oglejte si posnetek zaslona:

doc-barva-mehurčka-3

3. Nato v celice pod vsako kategorijo vnesite y in vnesite Bubble v celice pod vsako prazno celico. Oglejte si spodnji posnetek zaslona:

doc-barva-mehurčka-4

4. Vnesite to formulo = IF ($ A3 = F $ 1, $ C3, NA ()) v celico pod Y celico in povlecite ročico za polnjenje v obseg, ki ga potrebujete.

Opombe: $ A3 označuje ime kategorije v vašem prvotnem obsegu podatkov, F $ 1 pa kategorijo, ki jo potrebujete v tem stolpcu, $ C3 označuje vrednost y v vašem prvotnem obsegu podatkov.

doc-barva-mehurčka-5

5. Nato vnesite to formulo = IF (ISNA (F3), NA (), $ D3) v celico pod bubble celico in povlecite ročico za polnjenje do obsega, ki ga potrebujete.

Opombe: F3 označuje celico levo do aktivne celice, $ D3 pa vrednost mehurčka v vašem prvotnem obsegu podatkov.

doc-barva-mehurčka-6

6. Izberite nov obseg podatkov, ki ste ga ustvarili v zgornjih korakih, in kliknite Vstavi > Drugi grafikoni > bubblein izberite vrsto oblačka, ki jo potrebujete.

doc-barva-mehurčka-9

V Excelu 2013 kliknite Vstavi > Vstavite razpršen (XY) ali mehurčast grafikon > bubble.

Zdaj lahko vidite isto kategorijo z isto barvo mehurčkov.

doc-barva-mehurčka-8

Če želite spremeniti barvo grafikona glede na vrednost, pojdite na to vadnico Kako spremeniti barvo grafikona glede na vrednost v Excelu.

Najboljša pisarniška orodja za produktivnost

🤖 Kutools AI Aide: Revolucionirajte analizo podatkov na podlagi: Inteligentna izvedba   |  Ustvari kodo  |  Ustvarite formule po meri  |  Analizirajte podatke in ustvarite grafikone  |  Prikličite funkcije Kutools...
Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup  |   Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule   |  Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic   |  Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij:  12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

Opis

Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (13)
No ratings yet. Be the first to rate!
Jon
Jon
This comment was minimized by the moderator on the site
Nice except that the graph comes out with other values on the x axis than what is in the data table you make the graph on...
Reply
0
0
anurag.economics@gmail.com
    Jon
This comment was minimized by the moderator on the site
If you clear the cell that reads 'x' you should be able to get the values
Reply
Report
0
0
D
D    
This comment was minimized by the moderator on the site
wow what wizardry is this? it works but no idea why
Reply
0
0
racefface
racefface
This comment was minimized by the moderator on the site
Thanks for this guide - it's solved a big issue for me. Well, almost. I've got this set up, but also have Data Labels on the bubbles. However, I am having an issue with the Data Label dissapearing from the bubble when the Category (bubble colour) is changed. I've tried a few things, the thing that has come closest to solving the issue is: Changing all my data to the same category, configuring the Data Labels to the right format (the label content is coming from a range of cells), then changing all the data to the next category, and setting up the formats... repeating for all caegories. Once that is done then I can happily change the categories and the bubble colours change and the bubbles remain labeled... However.. If I save the document, close it and reopen then changing the category results in the bubble changing colour, but the data label on the bubble disspears. Looking at the settings nothing has changed but the label content does not show. Changing the cateogry back to the original value results in the label coming back.. Has anyone seen this before? ... and if so, any ideas on a solution? ~/R
Reply
0
0
Casey Fong
Casey Fong
This comment was minimized by the moderator on the site
continue from previous msg.... X axis = period, Y axis = value, bubble = value with customer name
Reply
0
0
Casey Fong
Casey Fong
This comment was minimized by the moderator on the site
Hi there, I would like to know is it possible to have the bubble's colour based on risk level with the following information availbale below and the colour of the bubble will depend on risk level (example, Medium = Orange, Low = Green, High = Red, Converted = Blue). I tried follow the example you showed above but couldn't get it working... customer Period Value Risk level A Jan-17 $15,000 Medium B Dec-16 $20,000 Low C Mar-17 $25,000 Converted D Feb-17 $10,000 High E Jan-17 $30,000 Medium F Apr-17 $8,000 Low Thanks in advance for your help! Casey
Reply
0
0
Mel
Mel
This comment was minimized by the moderator on the site
I see that these steps work, but there is no explanation of why. for example you use the formula "=IF(ISNA(H10),NA(),$D10)", what does this mean and why are you using it. Is there a document available that not only shows a user how to change the colours but explains the process.
Reply
0
0
Gareth
Gareth
This comment was minimized by the moderator on the site
you are probably doing what I did initially which is selecting the header rows when selecting the data, if you only select the values and no headers it will work fine
Reply
0
0
David
David
This comment was minimized by the moderator on the site
Thanks for this walkthrough. A problem that I have, and I see you have it too based on the screen shots, is that the x axis no longer reflects the values from your data. The position of the bubbles along the x axis may be accurately scaled but the actual values are missing. How do you fix that?
Reply
0
0
Becky
Becky     David
This comment was minimized by the moderator on the site
The x-axis displays the number of items in the list and the position of each one. The only workaround that I could figure out was to selected Edit Data and then select each category and specify the cell reference rather than leaving it as a range.
Reply
0
0
Becky
Becky     David
This comment was minimized by the moderator on the site
[quote]Thanks for this walkthrough. A problem that I have, and I see you have it too based on the screen shots, is that the x axis no longer reflects the values from your data. The position of the bubbles along the x axis may be accurately scaled but the actual values are missing. How do you fix that?By David[/quote] The values along the x-axis reflect the position within the selection, not the actual values for the x-axis. eg., the first bubble is position 2 (second row), second bubble is position 3 and so forth. The values generated along the x-axis will reflect the number of items in the list. The only workaround that I could discover was to Edit Data and then select each category and manually adjust the cell references for x-axis, y-axis, and bubble size to reflect the actual cell, not a range.
Reply
0
0
Sidhant
Sidhant     Becky
This comment was minimized by the moderator on the site
Hi Becky,


Thanks for sharing this with us. Can you please explain this with an example? It would be really helpful. Thank you.
Reply
0
0
Carmen
Carmen     Sidhant
This comment was minimized by the moderator on the site
An alternative to this is editing the data to not include the row header (ie, the "x"). This seems to make the values correspond with the x-axis.
Reply
0
0
There are no comments posted here yet
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations