Preskoči na glavno vsebino

Kako enolično razvrstiti številke obsega brez dvojnikov v Excelu?

V programu Microsoft Excel funkcija normalnega ranga daje dvojnikom enak rang. Če se na primer številka 100 dvakrat pojavi v izbranem obsegu in prva številka 100 zavzame rang 1, bo zadnja številka 100 zavzela tudi rang 1 in bo nekatere številke preskočila. Včasih pa morate te vrednosti razvrstiti enolično, kot sledi prikazanim posnetkom zaslona. Za več podrobnosti o edinstveni razvrstitvi, prosimo, sledite naslednjim navodilom, prikazanim korak za korakom.

Razvrsti številke obsega enolično v padajočem vrstnem redu

Razvrsti številke obsega enolično v naraščajočem vrstnem redu

Razvrsti številke obsega enolično v padajočem vrstnem redu

V tem razdelku vam bomo pokazali, kako enolično razvrstite številke obsega v padajočem vrstnem redu.

Za primer vzemimo podatke spodnjega posnetka zaslona, ​​vidite lahko, da je v območju A2 več podvojenih številk: A11.

1. Izberite B2, kopirajte in prilepite formulo =RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A2,A2)-1 v Formula Bar, nato pritisnite Vnesite tipko. Oglejte si posnetek zaslona:

2. Nato se v celici B2 prikaže uvrstitvena številka. Izberite celico B2 in postavite kazalec v spodnji desni kot, ko se prikaže majhen črn križec, povlecite navzdol do celice B11. Potem je edinstvena uvrstitev uspešna. Oglejte si posnetek zaslona:

Razvrsti številke obsega enolično v naraščajočem vrstnem redu

Če želite enotno razvrstiti številke obsega po naraščajočem vrstnem redu, storite naslednje.

1. Izberite celico B2, kopirajte in prilepite formulo =RANK(A2,$A$2:$A$11,1)+COUNTIF($A$2:A2,A2)-1 v Formula Bar, nato pritisnite Vnesite tipko. Nato se v celici B2 prikaže prva uvrstitvena številka.

2. Izberite celico B2, povlecite ročico za polnjenje navzdol do celice B11, nato je edinstvena razvrstitev končana.

Najboljša pisarniška orodja za produktivnost

🤖 Kutools AI Aide: Revolucionirajte analizo podatkov na podlagi: Inteligentna izvedba   |  Ustvari kodo  |  Ustvarite formule po meri  |  Analizirajte podatke in ustvarite grafikone  |  Prikličite funkcije Kutools...
Priljubljene funkcije: Poiščite, označite ali identificirajte dvojnike   |  Izbriši prazne vrstice   |  Združite stolpce ali celice brez izgube podatkov   |   Krog brez formule ...
Super iskanje: Več kriterijev VLookup  |   Multiple Value VLookup  |   VLookup na več listih   |   Nejasno iskanje ....
Napredni spustni seznam: Hitro ustvarite spustni seznam   |  Odvisni spustni seznam   |  Večkrat izberite spustni seznam ....
Upravitelj stolpcev: Dodajte določeno število stolpcev  |  Premakni stolpce  |  Preklop stanja vidnosti skritih stolpcev  |  Primerjaj obsege in stolpce ...
Predstavljene funkcije: Mrežni fokus   |  Pogled oblikovanja   |   Velika vrstica formule   |  Upravitelj delovnih zvezkov in listov   |  Knjižnica virov (Samodejno besedilo)   |  Izbirnik datuma   |  Združite delovne liste   |  Šifriranje/dešifriranje celic   |  Pošljite e-pošto po seznamu   |  Super filter   |   Poseben filter (filter krepko/ležeče/prečrtano ...) ...
15 najboljših kompletov orodij:  12 Besedilo Orodja (dodajanje besedila, Odstrani znake,...)   |   50 + Graf Vrste (Gantt Chart,...)   |   40+ Praktično Formule (Izračunajte starost glede na rojstni dan,...)   |   19 vstavljanje Orodja (Vstavite kodo QR, Vstavi sliko s poti,...)   |   12 Pretvorba Orodja (Številke v besede, Pretvorba valut,...)   |   7 Spoji in razdeli Orodja (Napredne kombinirane vrstice, Razdeljene celice,...)   |   ... in več

Napolnite svoje Excelove spretnosti s Kutools za Excel in izkusite učinkovitost kot še nikoli prej. Kutools za Excel ponuja več kot 300 naprednih funkcij za povečanje produktivnosti in prihranek časa.  Kliknite tukaj, če želite pridobiti funkcijo, ki jo najbolj potrebujete...

Opis

Kartica Office prinaša vmesnik z zavihki v Office in poenostavi vaše delo

  • Omogočite urejanje in branje z zavihki v Wordu, Excelu, PowerPointu, Publisher, Access, Visio in Project.
  • Odprite in ustvarite več dokumentov v novih zavihkih istega okna in ne v novih oknih.
  • Poveča vašo produktivnost za 50%in vsak dan zmanjša na stotine klikov miške za vas!
Comments (27)
No ratings yet. Be the first to rate!
iben
iben
This comment was minimized by the moderator on the site
Hi every one, i have this formula
=RIJEN($H$2:$H$7)-SOMPRODUCT(--(H2-E2/10000>$H$2:$H$7-$E$2:$E$7/10000))

it determines the rank of a value in a column. if there is an equal value, the rank is determined by a 2nd value in another column. Now the problem is when negative numbers occur in the 2nd column, the rank is determined inversely -1 gets a lower rank than 0

can anyone adjust this formula or create a new one for excel 2007 dutch version
Reply
0
0
Iben
Iben
This comment was minimized by the moderator on the site
Hi every one, i have this formula
=RIJEN($H$2:$H$7)-SOMPRODUCT(--(H2-E2/10000>$H$2:$H$7-$E$2:$E$7/10000))

it determines the rank of a value in a column. if there is an equal value, the rank is determined by a 2nd value in another column. Now the problem is when negative numbers occur in the 2nd column, the rank is determined inversely -1 gets a lower rank than 0

can anyone adjust this formula or create a new one for excel 2007 dutch version

thanks
Reply
0
0
JustZ52
JustZ52
This comment was minimized by the moderator on the site
Hey so I just worked on this formula for the past 45 minutes. The above formula is wrong, the output does provide duplicates but that is only because the countif range is not accounting for the entire range.

Above the descending formula is: =RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A2,A2)-1

The bold/underlined A2 cell should be equal to the ending of the range which is A11. Which would make correct forumla stance:

=round(RANK(A2,$A$2:$A$11,0)+COUNTIF($A$2:A7,A2)-1

For visuals, on my sheet I created a leader tracking board with the following formula and I got no duplicates see below 2 images with duplicate numbers but different ranking levels:


My Descending formula: =round(RANK(D7,$D$7:$BY$7)+countif($D$7:$BY$7,D7)-1)
Key Notes:
- My range is locked
- D7 is the start of my range and BY7 is the end of my range
- I have added the round formula to account for any decimals
- the (-1) will automatically subtract from the previous ranking.
View Attachments (2 / 5)
Reply
Report
0
0
crystal
crystal     JustZ52
This comment was minimized by the moderator on the site
Hi Zoe,
Thank you for your feedback. I will check the formula and make the changes.
Reply
Report
0
0
Rofijul Islam
Rofijul Islam
This comment was minimized by the moderator on the site
It's very helpful content. Thank You so much.
Reply
0
0
Sofi
Sofi
This comment was minimized by the moderator on the site
Thank you for the solution! Works perfectly!
Reply
0
0
Rick
Rick
This comment was minimized by the moderator on the site
This tip was PERFECT in solving my sorting issue! Thanks very much!!!
Reply
0
0
Brett
Brett
This comment was minimized by the moderator on the site
I still have duplicate rankings. Before I used COUNTIF the rankings were 4 for both, now they are both ranked 5 with COUNTIF BUT in my chart, it will only list one of the items twice instead of listing both items. Here is my formula: =RANK(V3,V$3:V$30, 1)+COUNTIF(V$3:V$30:V3,V3)-1
In the ranking chart it displays rank 4 as team 1 and rank 5 as team 1 since team 1 and team 2 have the same rank, team 2 is not listed. Here is the formula for those cells:=INDEX($L$3:$L$30,MATCH(SMALL($V$3:$V$30,Y3),$V$3:$V$30,0))
How do I make sure teams that are tied do not get left off list?


Reply
0
0
Ron
Ron
This comment was minimized by the moderator on the site
Formulas for unique ascending and descending are identical. Ascending should be: =RANK(A2,$A$2:$A$11,1)+COUNTIF(A2:$A$2,A2)-1.
Reply
0
0
vikas
vikas
This comment was minimized by the moderator on the site
if you see the below ranking, where the duplicate numbers found, number is missing.
Exmples
After 23 it goes to 25, after 29 it goes to 30, Formula miss the next number like - 24 & 29

Score Rank

4661 21

4650 22

4648 23

4645 25

4645 25

4644 26

4629 27

4626 28

4595 30

4595 30

4578 31

4438 32
Reply
0
0
Sifa
Sifa     vikas
This comment was minimized by the moderator on the site
What's the formula for this ranking where it combines same values into one ranking???
Reply
0
0
Musawir
Musawir
This comment was minimized by the moderator on the site
Hi, This formula just ranks all numbers in ascending/descending order and doesn't combine the duplicates into one rank. How do I combine the ranking for duplicates, for example two duplicate 100s to be combined and both ranked as 1, 3 duplicate 90s to be combined and ranked as 2, 2 duplicate 80s ranked as 3, etc.? In your example of total 10 students I want a formula that will rank the two 100s as 1, rank the two 90s as 2, rank the two 80s as 3, etc. Please help. Thanks
Reply
0
0
Alex
Alex     Musawir
This comment was minimized by the moderator on the site
if you do want this kind of ranking, what I would do is copy the whole list somewhere else, then use remove duplicates in the Data menu to leave only the individual values. rank these individual scores using a standard RANK formula and then use a simple VLOOKUP formula to return the value against the score in the full list.

this will show the values the way you want above.
Reply
0
0
Alex
Alex     Musawir
This comment was minimized by the moderator on the site
Why do you need to do this? a standard RANK formula will rank these examples as 1, 1, 3, 3, 5, 5. this is a much more usual way of ranking as if there are 2 first places the next in line would usually logically be 3rd not 2nd.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations